Springer, 2006-330 p.
MTDSC provides a step-change increase in the power of calorimetry to characterize virtually all polymer systems including curing systems, blends and semicrystalline polymers. It enables hidden transitions to be revealed, miscibility to be accurately assessed, and phases and interfaces in complex blends to be quantified. It also enables crystallinity in...
Akadémiai Kiadó, Budapest 1975. — 164 p.
Атлас термоаналитических кривых
This book is an ambitious undertaking by Dr. Liptay and co-workers to publish
the results of data (TG, DTG and DTA) obtained by means of the Derivatograph.
According to the preface, the collection of curves is to be broadened in scope after
this voIume so as to include the results of other...
2nd ed. — Elsevier, 2014 - 631p. The declared objective of this book is to provide an introductory review of the various theoretical and practical aspects of adsorption by powders and porous solids with particular reference to materials of technological importance. The primary aim is to meet the needs of students and non-specialists who are new to surface science or who wish to...
RSC Publishing, 2009. - 457p.
This book is the Proceedings of the 8th International Symposium on the Characterisation of Porous Solids. The conference is one of a series, held every three years, which covers developments in methods for the characterisation of porous materials, and applications of those methods. COPS VIII is concerned with fundamental and applied research on the...
Rodriguez-Reinoso F., McEnaney B., Rouquerol J., Unger K. (eds.) — Elsevier, 2002. — 809p.
The Sixth International Symposium on the Characterization of Porous Solids (COPS-VI)
was held at Alicante, Spain, on May 8-11, 2002 with about 220 participants from 29
countries. There were three Keynote lectures, 29 lectures and 154 poster presentations, with
several sessions devoted to...
Elsevier, 2000. — 699p.
The Fiith International Symposium on the Characterisation of Porous Solids (COPS-V) was
held at Heidelberg, Germany, from May 30 to June 2, 1999. Heidelberg showed its best side
with beautiful summer weather, friendly atmosphere and superb hospitality. About 220 participants
from 25 countries enjoyed a very successful meeting with 32 lectures and 155...
Rouquerol J., Rodriguez-Reinoso F., Sing K.S.W., Unger K. (eds.) — Elsevier, 1994. — 817p.
The organization of a triennial symposium on the Characterization of Porous Solids
(COPS) appears to be established as a major scientific and technological event. COPS I and
COPS II, the first and second IUPAC-sponsored symposia, were held at Bad Soden, Germany
and at Alicante, Spain,...
Rodriguez-Reinoso F., Rouquerol J., Sing K.S.W., Unger K. (eds.) — Elsevier, 1991. — 797p.
Since 1958, when the first major conference on porous solids was held at Bristol, U.K.,
considerable progress has been made in the development and characterization of porous materials.
The subsequent international symposia held in 1978 (at Neuchfttel, Switzerland) and in 1983
(Milan,...
Unger K., Rouquerol J., Sing K.S.W. (eds.) — Elsevier, 1988. - 658p.
The importance of porosity has long been recognized by scientists and
engineers. The first major symposium on "The structure and properties of porous
materials" was held in 1958 at Bristol University under the auspices of the
Colston Research Society. The two other previous symposia in this series were
on...
Wiley-ISTE, 2010. — 646 p.
It is well known that solid carbons can be found in various guises with different forms of bulk phases (graphites, diamonds and carbynes) as well as more molecular forms (fullerenes,nanotubes and graphenes) resulting from recent discoveries.
The cause of this rich polymorphism is analyzed in the first part of this book (chapters 1-5) with the...
1 edition, Elsevier Science, 2005. — 736 p. This book covers the most significant aspects of adsorption by carbons, attempting to fill the existing gap between the fields of adsorption and carbonaceous materials. Both basic and applied aspects are presented. The first section of the book introduces physical adsorption and carbonaceous materials, and is followed by a section...
2nd edition. — Elsevier, 2013. — 796 p. — ISBN: 978-0-12-375090-7. Quartz, zeolites, gemstones, perovskite type oxides, ferrite, carbon allotropes, complex coordinated compounds and many more - all products now being produced using hydrothermal technology. Handbook of Hydrothermal Technology brings together the latest techniques in this rapidly advancing field in one...
5th Edition. — Chapman & Hall, 1996. — 512 p.
This is the fifth edition of the highly successful work first published in 1968, comprising two definitive volumes on particle characterisation. The first volume is devoted to sampling and particle size measurement, while surface area and pore size determination are reviewed in volume
2. Particle size and characterisation are...
Llewellyn P.L., Rodriquez-Reinoso F., Rouqerol J., Seaton N. (eds.) — Elsevier, 2006. — 749p.
The 7th International Symposium on the Characterization of Porous Solids (COPS-VII) was held in the Congress Centre in Aix-en-Provence between the 25th-28th May 2005. The symposium covered recent results of fundamental and applied research on the characterization of porous solids....
Akadémiai Kiadó, Budapest 1976. — 169 p.
Атлас термоаналитических кривых
This book is an ambitious undertaking by Dr. Liptay and co-workers to publish
the results of data (TG, DTG and DTA) obtained by means of the Derivatograph.
According to the preface, the collection of curves is to be broadened in scope after
this voIume so as to include the results of other...
Akadémiai Kiadó, Budapest 1974. — 160 p.
Атлас термоаналитических кривых
This book is an ambitious undertaking by Dr. Liptay and co-workers to publish
the results of data (TG, DTG and DTA) obtained by means of the Derivatograph.
According to the preface, the collection of curves is to be broadened in scope after
this voIume so as to include the results of other...
Springer Science+Business Media New York, 2004. — 363 p. This book gives a unique overview of principles associated with the characterization of solids with regard to their surface area, pore size and density. The book covers methods based on Gas Adsorption (Physi- and Chemisorption), Mercury Porosimetry and Pycnometry. Not only are the theoretical and experimental basics of...
Elsevier, 1 edition, 2012, 600p. Following in the lineage of Adsorption by Carbons (Bottani & Tascon, 2008), this work explores current research within contemporary novel carbon adsorbents. Both basic and applied aspects are discussed for this important class of materials. The first section of the book introduces physical adsorption and carbonaceous materials, and is followed...
Springer, 2002, 438 p.
Surface Science is understood as a relatively young scientific discipline, concerned with the physical and chemical properties of and phenomena on clean and covered solid surfaces, studied under a variety of conditions. The adsorption of atoms and molecules on solid surfaces is, for example, such a condition, connected with more or less drastic changes of...
Wiley-VCH, 2010, 562 p. Written by the most prominent experts and pioneers in the field, this ready reference combines fundamental research, recent breakthroughs and real-life applications in one well-organized treatise. As such, both newcomers and established researchers will find here a wide range of current methods for producing and characterizing carbon nanotubes using...
Венгрия, Radelkis, 17 c. Кондуктометр типа OK I02/I предназначен для определения электропроводности жидкостей. Прибор снабжен шкалой отградуированной в единицах сименс /см/ с непосредственным отсчетом, благодаря чему нет необходимости в затруднительной компенсации имеющий место у обычных кондуктометров мостиковой схемы. Предел измерения регулируется от 0,1 микросименс до 0,5...
Academic Press, 2000. — 1405 p.
The Encyclopedia of Spectroscopy and Spectrometry provides authoritative and comprehensive coverage of the whole topic of spectroscopy, from theory to applications. Short articles, each covering one aspect of spectroscopy, provide the professional spectroscopic working in academia or industry with the essential facts and background on areas of...
InTech Published, 2011. — 382 p. — ISBN: 978-953-307-573-0. The Microwave heating has not only revolutionized the food industry but also has extended its wings widely towards its multidimensional applications. Thus it has opened new vistas of potential research in science and technology. The book is compiled into Seventeen Chapters highlighting different aspects varying from...
CRC Press, 2010. - 292 p. Shorter reaction times, higher product yields, and enhanced selectivity are some of the advantages microwave heating has over conventional methods, causing its use to transition from a curiosity to mainstream, both in industrial and academic settings. Microwave Heating as a Tool for Sustainable Chemistry showcases the application of microwave heating...
CRC Press, 2001. — 528 p. — ISBN10: 0824704908. —ISBN13: 978-0824704902. Integrates principles of electromagnetics, dielectrics, heat and moisture transfer, packaging, solid mechanics, fluid flow, food chemistry, and microbiology to provide a comprehensive overview of microwave processing in a single accessible source. Fundamental Physical Aspects of Microwave Absorption and...
Springer, 2008, 750 p.
The carbon nanotubes field has evolved substantially since the publication of the bestseller Carbon Nanotubes: Synthesis, Structure, Properties and Applications . The present volume builds on the generic aspects of the aforementioned book, which emphasizes the fundamentals, with the new volume emphasizing areas that have grown rapidly since the first...
The Royal Society of Chemistry, 2005, 283p.
Research and literature on nanomaterials has exploded in volume in recent years. Nanotubes (both of carbon and inorganic materials) can be made in a variety of ways. Many of these properties, such as high mechanical strength and interesting electronic properties relate directly to potential applications. Nanowires have been made from...
Wiley-VCH, 2004. — 283 p. Expectations of a technological revolution are associated with nanotechnology, and indeed the generation, modification and utilization of objects with tiniest dimensions already permeates science and research in a way that the absence of nanotechnology is no longer conceivable. It has progressed to an independent interdisciplinary field, its great...
90 Edition. — New York, 2009. — 2760 p. Mirroring the growth and direction of science for nearly a century, the CRC Handbook of Chemistry and Physics, now in its 90th edition, adds several new tables that will be among the most accessed in the world. These include Structure and Functions of Common Drugs, Solubility Parameters of Polymers, Major World Earthquakes, and...
London-New York, Springer, 2010. — 306 pages.
Channels of nanotubular dimensions exist in a variety of materials (examples are carbon nanotubes and the nanotubular channels of zeolites and zeotypes) and show promise for numerous applications due to their unique properties. One of their most important properties is their capacity to adsorb molecules and these may exist in a...
New York Basel: CRC Press, 2002. - 712 p. Publication Date: November 7, 2002 | ISBN10: 0824708431 | ISBN13: 978-0824708436 | Edition: 1 Offering the latest research and developments in the understanding of surfactant behavior in solutions, this reference investigates the role and dynamics of surfactants and their solution properties in the formulation of paints, printing inks,...
Academic Press, 1998. - 467 p. The declared objective of this book is to provide an introductory review of the various theoretical and practical aspects of adsorption by powders and porous solids with particular reference to materials of technological importance. The primary aim is to meet the needs of students and non-specialists, who are new to surface science or who wish to...
Amsterdam-Boston -London-New York-Oxford-Paris-San Diego- San Francisco-Singapore- Sydney- Tokyo, Elsevier Science, 2001. — 396 p. Thermal Analysis (TA) has become an indispensable family of analytical techniques in the polymer research. The increased importance of these techniques can be seen as the result of three more or less parallel developments: a tempestuous development...
Singapore: Wiley-Blackwell, 2008. — 480 p. Principles and Applications of Thermal Analysis is written by manufacturers and experienced users of thermal techniques. It provides sound practical instruction on using the techniques and gives an up-to-date account of the principle industrial applications. By covering basic thermogravimetric analysis (TGA), differential scanning...
Ottawa- Ontario: William Andrew, 2002. - 702 p. This comprehensive book containing essential information on the applicability of thermal analysis techniques to evaluate inorganic and organic materials in construction technology should serve as a useful reference for the scientist, engineer, construction technologist, architect, manufacturer, and user of construction materials,...
John Wiley & Sons, Inc., Hoboken, New Jersey, 2009. - 698 pages Presents a solid introduction to thermal analysis, methods, instrumentation, calibration, and application along with the necessary theoretical background. Useful to chemists, physicists, materials scientists, and engineers who are new to thermal analysis techniques, and to existing users of thermal analysis who...
Berlin Heidelberg New York, Springer, 2005. — 910 p. Thermal Analysis of Polymeric Materials systematically treats macroscopic measurements by thermal analysis and the quantitative link to microscopic, molecular structure and mobility. Reversible and irreversible thermodynamics, kinetics, quantum mechanics, and statistical thermodynamics are the roots of the described thermal...
Boca Raton-London-New York: CRC Press, 2006. — 416 p. As a result of the Process Analytical Technologies (PAT) initiative launched by the U.S. Food and Drug Administration (FDA), analytical development is receiving more attention within the pharmaceutical industry. Illustrating the importance of analytical methodologies, Thermal Analysis of Pharmaceuticals presents reliable and...
2nd Edition. — John Wiley & Sons Ltd., 1999. — 190 p. — ISBN: 0-471-98362-4. Thermal Analysis Fundamentals and Applications to Polymer Science T. Hatakeyama Otsuma Women's University, Tokyo, Japan F. X. Quinn L'Oral Recherche Advance, Aulnay-sous-Bois, France The first edition of this classic book remains one of the very few introductory books covering both theoretical and...
Chichester -New York- Weinheirn -Brisbane -Singapore -Toronto: Wiley, 1999. — 470 p. Handbook of Thermal Analysis Edited by T. Hatakeyama National Institute of Materials and Chemical Research, Ibaraki, Japan Zhenhai Liu Changchun Institute of Applied Chemistry, China This 425-page reference book covers a comprehensive description of the principles of thermal analysis (TA)...